Skill / Hiring Test One

Unix System Administrator
Skills Questionnaire

SECTION I:

Listed below are conditions you will be expected to accept as a
Unix System Administrator.   Please answer YES or NO for each item
listed below.

1.	Are you willing and able to work within the rules and
	regulations of a State institution?

2.	Are you willing and able to work on short notice, flexible
	hours and work schedules and overtime, if necessary?	

3.	Are you willing and able to communicate and work
	effectively with staff, students, faculty, supervisors,
	administrators and the public?

4.	Are you willing and able to do some heavy lifting on an
	occasional basis; i.e., 50 lbs or more carrying computer
	monitors or other heavy equipment?

5.	Are you willing and able to work within the safety
	standards, rules, and regulations of the Computer
	Science Department?

6.	Are you willing and able to work alone and set your
	own standards and priorities?

7.	Are you willing to perform some basic clerical/	
	bookkeeping types of tasks necessary in this job such
	as filling out log sheets, checking out equipment,
	maintaining supply inventory, etc?

8.	Are you willing and able to direct, schedule, and train
	student employees during an academic year?

9.	Are you willing to gain more responsibility and
	assist in supervisory and management tasks?




SECTION II:

Please rate your experience and/or training in the following
activities using the number guide below.  Respond with the number
from the number guide that best describes your abilities or knowledge.
If you do not resond to an activity, we will assume that you are
rating yourself "0" for that area.  Respond with only one rating
per activity.  Please be aware that any misrepresentation on this
form may serve as grounds for dismissal from employment should you
be appointed to a position.  Prior to hiring, an appointing authority
may ask you to demonstrate your abilities and may also contact
previous employers and/or reference to verify your statements.

NUMBER GUIDE FOR RATING EXPERIENCE AND/OR TRAINING

(4)	I have trained others to perform this work or activity.

(3)     I have enough experience and/or training to perform this
	work or activity without training or supervision and could train
	others.

(2)     I have had some experience and/or training performing this
	work or activity and could do it with supervision or training.

(1)     I have no experience and/or training in this work or activity
	but have observed others performing this work.

(0)     I have no experience and/or training with this work or
	activity and have not observed it being performed by others.

NOTE:   The term Unix refers to any implementation of Unix proper.
It does NOT refer to system administration utilities built on top
of Unix such as SMIT, SAM, Tivoli, or other such tools.

__________________________________________________________________
TYPE OF ACTIVITY                                            RATING
__________________________________________________________________

1.	Creating Unix accounts for new users

2.	Assisting users with the Unix C Shell environment	

3.	Assisting Unix users with the X.V11R5 environment	

4.	Assisting users with Unix UCB electronic mail	

5.	Assisting users with Unix C programming environment	

6.	Assisting users with a Unix NFS environment	

7.	Assisting users with Unix RQS environment	

8.	Assisting users with Unix lpd-based printing	

9.	Assisting users with Unix rlogin, rsh, rcp, and ftp	

10.	Assisting users with Unix filesystem permissions	

11.	Configuring VME backplane jumpers	

12.	Isolating hardware failures to board level components	

13.	Configuring SCSI ID jumpers	

14.	Configuring SCSI termination	

15.	Installing and configuring new SIMMs in Unix systems	

16.	Connecting physical coax Ethernet networks	

17.	Connecting physical twisted pair Ethernet networks	

18.	Configuring SCSI peripherals on a Unix system	

19.	Formatting hard disk drives for Unix systems	

20.	Repairing bad hard drive sectors	

21.	Diagnosing hard drive problems under Unix	

22.	Creating Unix filesystems with mkfs	

23.	Repairing Unix filesystems with fsck	

24.	Tuning Unix filesystems with tyfs	

25.	Installing internal peripheral components, e.g. drives	

26.	Configuring Unix disk partition tables	

27.	Troubleshooting persistent Unix filesystem problems	

28.	Configuring Unix lpd to access serial PostScript printers	

29.	Configuring Unix lpd to access remote printers	

30.	Configuring Transcript	

31.	Troubleshooting Unix lpd printing problems	

32.	Installing Unix kernel patches	

33.	Installing Unix bobs drivers	

34.	Reconfiguring Unix kernel options	

35.	Customizing Unix system boot initialization process	

36.	Using Unix OS source code to debug system problems	

37.	Customizing Unix OS source code	

38.	Configuring Unix system hostname	

39.	Configuring Unix system P zone data	

40.	Configuring Unix systems using TCP/IP networks	

41.	Configuring IP subnetworking on Unix systems	

42.	Debugging TCP/IP network connectivity problems	

43.	Configuring SLIP on Unix systems	

44.	Configuring FDDI on Unix systems	

45.	Configuring UUCP on Unix systems	

46.	Installing and configuring high-speed modems for use	
	with SLIP or UUCP on Unix systems

47.	Configuring Unix for serial port login terminal access	

48.	Debugging Unix serial port bus connections	

49.	Configuring system static IP network routing tables	

50.	Configuring system to use RIP dynamic routing	

51.	Configuring system to generate RIP dynamic routing data	
	with gated

52.	Troubleshooting IP routing problems	

53.	Configuring Unix filesystem exports	

54.	Configuring Unix network filesystem mount tables	

55.	Debugging Unix network filesystem access problems	

56.	Troubleshooting network filesystem performance problems	

57.	Configuring Unix NFS automounters	

58.	Troubleshooting NFS automounter configuration errors	

59.	Configuring AMD maps	

60.	Installing GNU gcc from distribution	

61.	Installing MIT X from distribution	

62.	Writing rdist distribution files	

63.	Troubleshooting rdist problems	

64.	Configuring Domain Name Service clients	

65.	Configuring Domain Name Service servers	

66.	Configuring tertiary DNS servers	

67.	Writing DNS data files	

68.	Troubleshooting DNS data file errors	

69.	Using tar to backup filesystem data to tape	

70.	Using NFS to backup filesystem data	

71.	Using dump to backup fileystem data to tape	

72.	Restoring entire bootable system from dump tape	

73.	Restoring user files from dump tape backups	

74.	Performing Unix filesystem backups to remote	
	network tape devices

75.	Identifying Unix system security vulnerabilities	

76.	Monitoring Unix systems for security violations	

77.	Recovering from a Unix security violation event	

78.	Customizing Unix vnode addressing	

79.	Customizing BSD syslog configuration	

80.	Customizing sendmail configuration files	

81.	Writing sendmail configuration parsing rules	

82.	Writing complex sendmail aliases (includes, pipes, files)	

83.	Testing sendmail configuration with test mode	

84.	Debugging sendmail parsing rules	

85.	Installing and configuring new network service daemons	
	to use inetd

86.	Configuring periodic system jobs with cron	

87.	Compiling and installing public domain software	

88.	Installing vendor supported third-party software	

89.	Writing and debugging PERL programs	

90.	Writing and debugging OPAL programs	

91.	Writing and debugging C Shell programs	

92.	Writing and debugging Bourne shell programs	

93.	Writing and debugging C programs	

94.	Coordinating teams	

95.	Training other system administrators	

96.	Developing training courses or programs	

97.	Using Rand MH	

98.	Using Elm	

99.	Using Emacs	

100.	Using the GNU set of development tools	

Please supply names of persons who can verify the information given
in Section II, e.g., previous employers.


Names				Address and Phone Number

____________________________	____________________________

____________________________	____________________________

____________________________	____________________________



SECTION III:

Please rate your experience and/or training in in the configuration,
operation and maintenance of the following equipment using the
number guide below.  Respond with the number which best describes
your training and/or experience.  If you do not respond to an item,
we will assume that you are rating yourself "0" for that area.
Circle only one number for each item.  Please be aware that any
misrepresentation on this form may serve as grounds for dismissal
from employment should you be appointed to a position.  Prior to
hiring, an appointing authority may ask you to demonstrate your
abilities and may also contact previous employers and/or reference
to verify your statements.

NUMBER GUIDE FOR RATING EXPERIENCE AND/OR TRAINING

(4)     I have trained others in the configuration, maintenance,
	and operation of this equipment.

(3)     I have enough experience and/or training with the configuration,
	maintenance, and operation of this equipment to perform it without
	training or supervision and could train others.

(2)     I have had some experience and/or training with the
	configuration, maintenance, and operation of this equipment and
	could do it with supervision or training.

(1)     I have no experience and/or training with the configuration,
	maintenance, and operation of this equipment but have observed
	others performing this work.

(0)     I have no experience and/or training with the configuration,
	maintenance, and operation of this equipment and have not observed
	it being performed by others.

NOTE:   References to a vendor implementation of Unix, e.g. SunOS,
implies the operating system proper.  It does NOT refer to system
administration utilities built on top of the operating system such
as SMIT, SAM, Tivoli, or other such tools.

__________________________________________________________________
TYPE OF EQUIPMENT	                                    RATING
__________________________________________________________________

101.	Sun Sparc systems running SunOS	

102.	Sun Sparc systems running Solaris	

103.	DEC stations running ULTRIX	

104.	DEC stations running OSF/1	

105.	HP workstations running HPUX	

106.	Systems running NeXTSTEP	

107.	Systems running BSDI, BSD43, BSD44, or Linux	

108.	Systems with more than 8 cpus	

109.	NCD X terminals	

110.	Sun 4 and Sun 3 VME based systems	

111.	Solbourne systems	

112.	SGI workstations running IRIX	

113.	Macintosh systems	

114.	IBM RS6000 systems running AIX	

115.	Symbolics	

116.	Telebit Netblazer terminal server	

117.	Xylogics or Sun terminal server	

118.	Livingston Portmaster terminal server	

119.	Telebit modems	

120.	Cisco Systems routers	


Please supply names of persons who can verify the information given
in Section III e.g., previous employers.


Names				Address and Phone Number

____________________________	____________________________

____________________________	____________________________

____________________________	____________________________


Unix System Administration Handbook   |  Linux Administration Handbook
FAQ  |  Errors  |  Goodies  |  Purchase  |  Register  |  Send Email


Hosting for admin.com provided by Applied Trust Engineering.